Abrites Starter Pack Plus with AVDI Plus, PROTAG, ABPROG, DS-Box and ZN085

The Abrites Starter Pack Plus includes everything in the Starter Pack — AVDI Plus, PROTAG, ABPROG, Distribution Box Set, Tough Case and 12 months of Support Plan Service Plus — and adds the ZN085 RH850/V850 Programmer. That one addition opens up bench procedures on locked processors that most tools on the market cannot reach.

What’s in the pack

• AVDI Plus — the latest Abrites vehicle diagnostic interface, with CAN-FD and Ethernet for 2018-onward vehicles
• ZN103 PROTAG Programmer — key and transponder programmer for cars, motorcycles, trucks and buses
• ZN130 ABPROG Programmer Set with software activation — adapters, pins and cables for NEC MCU, SPI, I2C and EWS bench work
• ZN151 Distribution Box Set — cables, needles, plugs and connectors for bench and boot-mode work
• ZN085 RH850/V850 Programmer — reads and writes modules with locked RH850 and V850 processors
• ATC07 Tough Case — water-, dust- and impact-resistant case for the van or the workshop
• Support Plan Service Plus (SPS+) — 12 months of access to the Abrites ticketing system plus interface replacement cover

ZN085 — unlock the locked. Modules built on locked RH850 and V850 processors — BCMs, virtual cockpits, instrument clusters and handsfree modules — are used across a wide range of brands and are off-limits to conventional tools. The ZN085 connects on the bench by soldered connection and reads and writes data with no trace cutting and no pin lifting, opening up cluster calibration, module replacement and key work that used to need the dealer.

AVDI Plus — the core of the Abrites system. Every Abrites solution runs through the AVDI. Out of the box it covers standard diagnostics — full module scan, reading and clearing trouble codes, live data and actuator tests — plus advanced functions such as guided procedures for BMW, long coding for VAG and SCN coding for Mercedes-Benz. As your work grows, you add brand-specific Abrites licences to unlock key programming, module adaptation and calibration — often going further than the factory tools.

PROTAG — key programming without limits. The new-generation PROTAG has three transponder slots, one of them built for Mercedes-Benz truck keys, and an ergonomic layout that removes transponder positioning errors. It programs every Abrites key and transponder plus a wide range of OEM ones, for spare key and all keys lost jobs.

Bench and boot-mode work, covered. The ABPROG set and the Distribution Box Set give you what you need to work on modules directly on the bench or in boot mode — ECUs, EIS/EZS units, instrument clusters, transmission control units, VCUs and data communication modules.

Built for professionals who go deeper. If your work includes module replacement, cluster calibration or bench-level recovery, the Starter Pack Plus is the setup to start with — one investment that covers everyday diagnostics and the advanced jobs other shops have to turn away. Prefer to start smaller? The Abrites Starter Pack has everything except the ZN085.

Good to know: brand software licences are sold separately, and the AVDI needs an active annual subscription to use them. Every item in this pack is also listed on its own, so you can add spares or a second station later.