Skip to main content
Hide

Abrites NN011 Dashboard Calibration for New Nissan Vehicles

Abrites NN011 Dashboard Calibration for New Nissan Vehicles-0 thumb
DG-ABR-NN011

Abrites NN011 Dashboard Calibration for New Nissan Vehicles

$945.00

  • Digital Product
  • New Arrival
Abrites SKUNN011
BrandAbrites
Product typeSoftware licence
FunctionDashboard calibration; disables ABS–dashboard sync
Vehicle makesNissan, Mitsubishi
FitsJuke F16 2019–2023, Qashqai J12 2020–2023, X-Trail / Rogue T33 2020–2023, Sentra B18 2020+, Skyline 2021+, Mitsubishi Outlander 2020–2023
Working methodInternal CAN-Bus
RequiresAVDI interface with active annual subscription (AMS)
Additional hardwareCB012 cable set, CB021 jumper cable
AvailabilityDelivered electronically

The Abrites NN011 licence is the first Abrites licence for dashboard calibration on Nissan. It allows correction of the values inside analogue and virtual instrument clusters in minutes on Nissan models from 2019 onwards, via internal CAN-Bus connection.

The software disables the synchronisation of the dashboard with the ABS, which means no opening or cutting of the ABS module and no additional hardware — no filters are needed.

Functionalities

  • Dashboard calibration via internal CAN
  • Disables the synchronisation between the ABS and the dashboard

Supported models

  • Nissan Juke F16 2019–2023 (analogue)
  • Nissan Qashqai J12 2020–2023 (analogue and virtual)
  • Nissan X-Trail / Rogue T33 2020–2023 (analogue and virtual)
  • Nissan Sentra B18 2020+ (analogue)
  • Nissan Skyline 2021+ (analogue)
  • Mitsubishi Outlander 2020–2023 (analogue and virtual)
  • Other models with the same dashboards, equipped with S6J329, S6J328, S6J332 or S6J32L MCUs

Once connected via CAN you can read the data in kilometres or miles and edit it accordingly. The correction is done when the original dashboard is replaced and the replacement module has to be set to the correct value from the original one. Abrites strongly suggests following the user manual when establishing the connection and performing the procedure. This licence is intended for lawful repair work only.

What you need alongside it. Abrites lists the CB012 direct CAN-BUS / LIN-BUS cable set and the CB021 Renault-Nissan jumper cable as the hardware needed to complete the procedure.

An AVDI interface with an active annual subscription is required to use this licence. Delivered electronically; your AVDI serial number is needed to process the order.