Yanhua MINI ACDP-2 Key Programmer Base Unit

Module features:

It supports 93/24/25/35/95 series EEPROM in circuit programming (ICP) and on adapter board programming (OBP). This module is a necessary basic configuration for the modules.

Extended functions: By expanding more adapters to achieve various functions such as ECU programming key programming / matching, ECY refresh.

The current adapters include BMW key refresh, BMW FRM (footwell), BMW EGS (Gearbox), Fujitsu CPU, VW MQB, Jaguar, Land Rover KVM, Porsche BCM, Volvo etc.

• No need removing chip
• No need solderingN
• No need cutting line
• No need lifting the pin.
• USB direct connection
• Plug and play
• WIFI connection
• Wireless Free.
• Pin intelligent detection
• Data reading and writing is safe and reliable.

ACDP 2 Programmer Configuration List (ACDP Host):

(1pc) ACDP 2 Programmer
(1pc) Puncture Socket (With one more plastic part）
(1pc) BAV-KEY adapter
(1pc) P8P Cable
(1pc) 8P Cable
(1pc) 20P Cable
(1pc) 20P to 8P cable
(1pc) Android cable
(1pc) IOS cable
(1pc) USB cable
(1pc) OBD cable
(1pc) (14V) Switch Power Supply

Operating system requirements:

iOS (iPhone/iPad/Mac):

• System Version: 9.0 or above
• Device: iPhone 6 or newer
• RAM: 2GB or more
• Storage: 1.5GB or more
• Download the app from the iOS App Store by searching for 'ACDP'

Android (Huawei, Xiaomi, Oppo, Samsung, etc. with Qualcomm chipset):

• System Version: 5.0 or above
• RAM: 2GB or more
• Storage: 1.5GB or more
• Download and install the Android app

Windows PC (Windows 7 and 10):

• System Version: Windows 7 or 10 (WinXP not supported)
• RAM: 2GB or more
• Storage: 1.5GB or more

Yanhua Mini ACDP Function:

EEPROM Programming:

• Support 93/24/25/35/95 Series EEPROM in circuit programming (ICP) and on adapter board programming(OBP).
• Support CAS1-CAS3+ IMMO key programming and mileage reset through OBD mode.
• Support CAS3+/3++, CAS4/4+key programming and mileage reset by ICP. Data reading and writing without lifting the pin. No removing any components. Intelligent detection.
• Support FEM/BDC IMMO key programming and mileage reset. Fully automatic mode matching. Safe, reliable and fast! Support FEM/BDC module restore, FEM/BDC backup and write anti-theft data at the same time.
• Support key unlocking, key refresh function.
• Repair (FRM) Footwell module data without coding.
• Support BMW 8HP (F/G chassis) gearbox refresh. 6HP (F chassis) gearbox refresh and cloning.
• Support CAS1-CAS4 data restore. It can modify vehicle frequency, VIN, ISN code, or replace CAS module by modifying EE data.
• Support OBD restore CAS3/CAS3+/CAS3+ problem caused by downgrade
• Read ISN codes of N20/N55/N13 by OBD or without openning the DME shell. Read ISN code of MSV70/MSV80/MSD80 without opening the DME shell. Read ISN code of other models (B38, etc.) by opening the shell.
• Support instrument calibration of BMW full range.

Jaguar/Land Rover KVM module Programming:
Support Adding key and all-key-lost for new Jaguar and land rover with KVM module after year 2015.

Porsche BCM module Programming:
Support Adding key and all-key-lost for new Porsche after year 2010

Volkswagen MQB module Programming:
Support parts of VDO key programming/mileage adjustment of VW MQB platform via OBD, and Passat MMC(NEC D70F3525+95320) instrument adjustment after years 2015 by ICP mode.

Fujitsu CPU module Programming:
Support Fujitsu CPU MB91F (Honda Fit,KIA K3/K5,Sonata 9,etc.) Mileage adjustment.

Clear EGS ISN:
For connecting BMW 6HP/8HP gearbox

Functions includes as below:

• EGS State
• Clear ISN
• Reset Adaptation
• Backup Coding
• Recover Coding
• Volvo ECM Key Programming:
• Adding Key & All Keys Lost from 2009-2018

VW/Audi Gearbox Clone Module:
Support VW, Audi DQ200 (0AM/0CM), DQ250(02E/0D9), DL382(0CK), DL501(0B5), VL381(0AW) models and etc.