AccuReader For Kawasaki Motorcycles KA14 / KW16

This system will allow you to read the KW16 keyways completely and accurately without the removal of any locks.

It takes only minutes to read the depths for each cut in each position for a complete key. The Accu-Reader works on the process of elimination to decipher the correct depths of the lock. By checking the deepest cut first you eliminate what the cuts are not. Therefore it is essential to always read depth slide #4 first. Due to the construction of the KW16 ignitions, the process for originating a key differs slightly from a traditional Accu-Reader. The primary way for originating a key will be from using the Seat Lock which has all 6 spaces. If you find that the ignition has been changed out, please refer to KW16 Ignition Section for instructions on making an ignition key.

The Accu-Reader key designed to be used for wafer positions 4-6 on one side of the key and wafer positions 1-3 on the opposite side of the key. All the positions can be read from one side of the key, however it is recommended to flip the key over and use the other side. This allows for reading the 1-3 wafer positions with a fully or almost fully inserted key, increasing the accuracy.

Package Contents:

• 1-Accu-Reader key
• 1-insertion/release slide
• 1-depth slide #4
• 1-depth slide #3
• 1-depth slide #2
• 1-Tube storage container
• 1-Tube Cap

KW16 compatibility list:

• Kawasaki ZX6R/RR 2003+
• Kawasaki ZR7/s 1999+
• Kawasaki ZRX1100/1200 1999+
• Kawasaki ZX10/12/14 1999+
• Kawasaki 650R/W 1999+
• Kawasaki Z750/1000 1999+
• Kawasaki ZZR1200 1999+